The Bike tutors patented design  will fit almost types of bicycle. Details of the various fitting options  are included with the Bike Tutor . Should you find yourself unable to fit the Bike Tutor we advise you seek the help of your local bike shop. If you still can't get it to fit simply return it in an undamaged condition within 7 days for a full refund.

BIKE TUTOR IS AVAILABLE EXCLUSIVELY AT OUR ONLINE PAYPAL STORE

Central to the patented design is the mounting clamp. This clamp is fixed to the frame of the bike, to   this the fully adjustable side plates, seat and leg guards are mounted. As a general rule, if you can fit the mounting clamp to your bike , you can fit the Bike Tutor.

How To Fit the Bike Tutor

Attach the frame clamp using the 2 U clamps and 4 8mm nuts. Do not over tighten the clamp as this could cause damage to your bike, we advise that your firstly find the correct position for the Bike Tutor and only when satisfied should the main clamp be tightened enough to prevent the seat form moving no more.

Attach the 2 adjuster plates to the clamp using 2 fasteners on each side. Choose a position that enables the seat unit to sit on top of the crossbar, and close to the handlebar stem.

Using 2 fasteners on each side attach the seat unit. We advise that you firstly fit the single forward fastener (Shown) then raise the seat to a level position before fitting the second fastener. In this way the Bike Tutor can be fitted to a range of bikes with different angles while providing your child with a solid, level secure seat.

Fit the leg protectors positioning them so that they do not touch or effect the forks or the correct turning of the front wheel. At a later stage we advise that you adjust the leg shields forwards or backwards to suite your child.

When your happy with the position of the Bike Tutor and have thoroughly checked the clearances  between the bike Tutor and the front wheel and handlebars, tighten all bolts and fasteners.

With your child seated on the Bike Tutor  check the height of the footplates. Remove your child then raise or lower the foot plates to the preferred height for your child. To change the plates, simply remove from one side, invert and fit to the other side using the 3 fasteners provided.

Finally fit the child steering bars to the top of the handlebars. ensure that once fitted they do not effect the correct operation of the controls.